Hi,
Until yesterday, I had 100cm dish (the one on the floor) mounted to a TM2100A motor andI was able to get most of satellites on the east and everything until 15w. I did not get all of the arc because the dish was pretty rubbish and always struggled to get the elevation right as it would not stay in place.
However, today I received a new 110cm dish and a TM2600 M3 motor (also using Diseqc 1.2 instead of Usals) and got it mounted and all and can get all of the east satellites but nothing...
Possible arc issue or neighbours' extension blocking the way
Until yesterday, I had 100cm dish (the one on the floor) mounted to a TM2100A motor andI was able to get most of satellites on the east and everything until 15w. I did not get all of the arc because the dish was pretty rubbish and always struggled to get the elevation right as it would not stay in place.
However, today I received a new 110cm dish and a TM2600 M3 motor (also using Diseqc 1.2 instead of Usals) and got it mounted and all and can get all of the east satellites but nothing...
Possible arc issue or neighbours' extension blocking the way