Hi Guys need some help, advice on NEW MOTORISED SATELLITE SETUP
Have a Technomate 5402 M3 Satellite receiver and a Technomate TM2600 M3 Diceqc HH Motor. Quad LNB, 2 cables 1 to motor then to LNB and another straight to LNB
Have everything setup but the first thing I notice was when I tried manual button it did not move east or west checked software and deleted limits but still no movement. There is on motor power green led and a flashing orange signal to say received command then a solid...
Problem with new install motorised system
Have a Technomate 5402 M3 Satellite receiver and a Technomate TM2600 M3 Diceqc HH Motor. Quad LNB, 2 cables 1 to motor then to LNB and another straight to LNB
Have everything setup but the first thing I notice was when I tried manual button it did not move east or west checked software and deleted limits but still no movement. There is on motor power green led and a flashing orange signal to say received command then a solid...
Problem with new install motorised system