Hi,
I am having problems setting up my system. Im fairly clued up on what to do, but think I need some more advise.
I have an 80cm motorised dish setup, using USALS and have set it up correctly as far as I can tell.
My Lat and Long is in correctly, as is azimuth/elevation etc.
The ZERO degrees point for the motor is set to due south, and I am using thor 0.8 as my guide.
USALS gets thor 0.8 with a signal strength of around 70-75 and I can go to hotbird at 13, and get a similar SNR.
After that...
Allignment issue
I am having problems setting up my system. Im fairly clued up on what to do, but think I need some more advise.
I have an 80cm motorised dish setup, using USALS and have set it up correctly as far as I can tell.
My Lat and Long is in correctly, as is azimuth/elevation etc.
The ZERO degrees point for the motor is set to due south, and I am using thor 0.8 as my guide.
USALS gets thor 0.8 with a signal strength of around 70-75 and I can go to hotbird at 13, and get a similar SNR.
After that...
Allignment issue