As the title, where might I be able to obtain a Stainless equivalent of the declination fine adjuster for the Giby? It measures M8x170MM although only needs to be 90MM from threaded tip to centre of eye.
The original is obviously BZP as mine is now DRK (Dull, Rusty and Knackered) and I'm fed up with continually coating it in grease and having to wire brush it to stop it seizing up.
Standard eye bolts are too large in the eye to fit the gap behind the reflector support, I've found marine wire...
Replacement Eye stud for 1.2M Gibertini?
The original is obviously BZP as mine is now DRK (Dull, Rusty and Knackered) and I'm fed up with continually coating it in grease and having to wire brush it to stop it seizing up.
Standard eye bolts are too large in the eye to fit the gap behind the reflector support, I've found marine wire...
Replacement Eye stud for 1.2M Gibertini?