Creating this thread just in case I decide someday go ahead with new project - to have 1.8m glass dish installed on this motor. Motor looks OK, in fool working condition. Connected 20V DC and it moves H-H easily taking only ~0.5A. So, when I start the project then I will probably do the following things:
- change reed switch to optical or hall sensor;
- eliminate declination adjustment on the motor;
- make new declination adjustment mechanism separately;
- connect the dish in such a way...
Ajak Patriot
- change reed switch to optical or hall sensor;
- eliminate declination adjustment on the motor;
- make new declination adjustment mechanism separately;
- connect the dish in such a way...
Ajak Patriot