Receivers with the lowest Symbol Rate?
Does anyone know if there are any receivers that can do Symbol rates in kS/s ranges below 1000, I know that some PCI cards can do it, but are there any receivers that are able to go really low in the...
View Article16e tring transponders
Hi, I currently have a T90 dish setup but I keep loosing the tring transponders, always during the rain and sometimes just randomly they go for days. I read the t90 despite its size performs as a...
View ArticleIs this the correct ibu lnb for my install?
Hey all, I’m having a motorised dish installed this week but I’ll be providing the LNB and receiver as the installer doesn’t use Inverto Black Ultra. I’m only having a single feed installed, as the...
View ArticleSingle & quad universal lnbs + multiswitch
Good day gentlemen! Could you please check and advise if below configuration will work. I have 2 single universal linear LNB, 1 quad circular LNB and 8 STBs. Deciding now to order either 8/8 or 4/8...
View Article100%quality and strength on skynews, zero% on bbc. full epg, but no normal...
I have just increased the size of my sat dish from 80 to 110. I live in south France and use the SkyHD box with a paid for freeview card. Before upgrading to the 110 dish I was receiving all Sky...
View Article'f' barrel thread size & type needed.
As title ... I need to re-thread the 'F' barrel section of an N to F rf adapter - it's also the same size as the regular F barrel through connector for joining two cables etc. Iv'e had some N to F...
View ArticleTechnical q relating to hm 9503 hd receiving digiturk from eutelsat 7a (7e)
Firstly, please move this thread if it is in the wrong place, I wasn't too sure where my Q fits. I have the above STB which receives Digiturk channels in Turkey. I am trying to figure out why the...
View ArticleTweaking latitude has improved my signal
Hi all, I've had my 90cm motorised dish installed at my new property. The dish has had to be placed in a bit of an awkward location but the installer finally got there in the end. With my correct...
View ArticlePoor signal
I have one dish and a TV with a humax receiver connected to it and also a TV with an integrated receiver connected. The integrated TV receives all channels fine. Both strength and quality is fine. But...
View ArticleLong and lat on sl1 first strike meter
Hi can someone tell me what my long and lat should read on SL1 First Strike Meter. I've moved to Newport South Wales also need 3 Transponders one for 13east one for 19.2 east and one for 28.2 east as...
View ArticleAdapting a Prodelin poloriser.
For something to do while the cold wet weather is with us , here is a little project to modify a standard Prodelin C-band poloriser with motorised polarity / skew for use on a Elite 2.2 PF antenna. It...
View ArticleLooking for jaeger 1224 parts
For restoration of a SMR 1224 I need a worm axel . The former user hat put to reduce the play , too much tension on the springs . As result , a broken worm axel . Who can help me out ?
View ArticleClik here to view.
Repairing broken gear jaeger smr 1224
Restoration Jaeger SMR 1224 Rotor While waiting for finding a spare worm gear , decided to give it a try to repair the broken worm . Drilled at a lathe 7 mm holes in both ends Made a 7 mm shaft from a...
View ArticleClik here to view.
Precision 1.3 install
I have managed to get my hands on two brand new Precision 1.3 refelectors, been in storage and never been used, so I thought it was only fair to get on up in the garden on my spare Jaeger 1224 EL. The...
View ArticleIdentification Of Ku-Band Feed Component ?
Hi, Can anyone please confirm what the Ku-Band feed part in the pics below is for? I cant remember where I got it from originally, however, I came across it in the loft in a box of satellite junk...
View ArticleAndrew/cm 184 subreflector
Hi. I don't know if this is the right place to post this question but I give it a shot. I came across a CM 184 antenna without the subreflector. Does anyone know if it possible to buy a subreflector as...
View ArticleBSC 621 C/Ku lnb to C/Ka LNB
OK, well wasn't sure if this was a goer, but I took the Ku LNB off a BSC C/Ku combo LNB as Ku was never very good and grafted a Hughes Ka LNB with the XMW FD9000 feed to the end. using half the casing...
View Articleandrews feed horn big dissapointment
hi just changed from a standard 40mm maximum lnb to a inverto 1.3 and channel master {andrews] feedhorn, only to find im getting slightly less signal with the feedhorn setup.(big Dissapointment) ive...
View ArticleExperience with difference between several feed horns
I want to try some feedhorns on my Fibo 120 , does any on Experience with it ? I found some feedhorns and in the specs i read f.d 0.5-0.7 is there a optimum for the feedhorns ?
View ArticlePromax HD Ranger+
Could be a bargain going here Promax HD Ranger + Spectrum Analyser 5055460299421 | eBay
View Article