Clik here to view.
Antique Prodelin (10 ft) project
O.K - Folks - In a moment of madness i bought this dis - assembled dish just over a year ago , but its only over the past couple of months that i,v had enough time to see just exactly what i had here...
View ArticleLimit issue technomate tm 2600 sat motor
My factory preset hardware limits are set at 70 East to 70 West.Moving my dish East it stops at 56 and 58 on the West.I have not set any limits on my satellite receiver and can someone please guide me...
View ArticleMulti stream
Good evening Which sats do multi stream How to receive Are they on powerful TPS or on week ones any good channels on multi stream equipment in use Gibertini 75 cm dish Octagon sx88 Thank you for the...
View Article1 metre or 75 cm
Good afternoon Just wondering I got 75 cm dish and find it very difficult to find arc What’s will be the difference if I change the dish to 1 meter apart from getting the weak sats and tps Is it easy...
View ArticleClik here to view.
Tree fellers..(the budget version of four candles)
Because of trees round our property, I've always had problems getting any signal past 22W.... However, we've now reached the point where we can contract a tree surgeon to do the work.. This afternoon...
View ArticleNo signal from certain transponders at 16e?
As some of you know from my prior threads, I recently set up a new motor for my satellite dish. It is working fine with USALS, I'm receiving just about everything I should from 28E to 30W, with good,...
View Article4.5m dish and mount for sale .
I any of you guys are looking for a nice dish and mount for sale dont forget the auction at Peaker Pattinson Welcome to ppauctions.com - Peaker Pattinson (Auctioneers) Ltd As all the old Elite Antennas...
View ArticleEchostar ad-3000ip viaccess with mpeg-2 mp do i need a replacement receiver ?
Since we have the lock down in the UK I thought I would fire up the Sat system its a 30 year old Echostar AD-3000IP Viaccess with a 4m dish on a polar mount with a 36 inch jack . This system has not...
View ArticleMSP 200 /990 /995 User Manual
Hi, can anyone point me in the of a User Manual for an MSP 200/R. I have read here that it is similar to the 990 AND 995. I saw a post here with 4 pages of the 990's manual but I need a bit more....
View ArticleMulti-lnb losses off prime focus
I have an 88cm motorised dish but have found that I am missing many lower power feeds in the SE UK. So I have set up a 1.2m dish with a prime focus of 10 East and a second LNB on 7 East. This seems to...
View ArticleFixing installation
Today i disasemble all the installation and for my surprise all the motor frame were loose thats why i had too much play in the pole of the motor. I put the pole as much as possible plumb and now is...
View ArticleStab spacers
hi all i am looking for a set of stab ds-01 spacers so i can install my gibertini op125l dish onto a stab 120 hh motor. i have searched high and wide but no luck. can someone please point me in the...
View ArticleDubai one
Good afternoon trying to tune into Dubai one but no luck Any advice thank you
View ArticleClik here to view.
Gd satcom/prodelin depolariser
Hi. Browsing from some time about depolariser i have noticed three models from GD Satcom/Prodelin, i wonder, what is the diffference. Why is need for three models ?
View Article1m channel master vs stab motor
Hi, It's been a while since I posted on here, had a break from messing around with satellites, but the bug is back. I have a few new 1m channel master dishes and was wondering about using it on a stab...
View ArticleEchostar ad-3000-ip firmware
Hi, I am hoping someone has a copy of the Echostar ad-3000-ip firmware v900 or v901beta. I can only find version for the ad-3000-ipvia which is a different version. I know I cannot go back to old 300...
View ArticleTechnomate 5402 mk 3. lnbf.
I dug out my old TM yesterday and used the 2nd input from the twin LNB. Sky News on 0.8 west but get lnbf but it works fine on the Octagon SF8008. Then I tried the motorised cable from the LNB and got...
View ArticleEgis robot and a new control unit
Hello. I started developing a new control unit for the EGIS ROBOT positioner. I used the Raspberry Pi 3 and the Node.js web server as the control software. It communicates with this unit from a normal...
View Article