Stab DiSEqC Motor not following STB commands
I have a DiSEqC motor that has seized due to an error of mine I allowed the motor to move to 60 degrees east in DiSEqC 1.2 Now I cannot get it to follow the commands by the receiver it just moves to...
View ArticleReceiving both 19.2 and 28.2
Hi, Our Sky Contract is up later in the year and we've decided that rather than keeping this going I'd like to go FTA, but I'm also interesting in receiving services from 19.2 East (I'm learning German...
View ArticleMissing frequencies on 5E?
For some reason, I am unable to tune into the following frequencies on 5E. 11804H 11881H 11823V 11977V 12034H Does anyone know of any issues with those? Maybe they moved to SES-5 (which would be a bad...
View ArticleWeird Black Ultra Failure
A couple of years ago I followed the crowd and got myself a Black Ultra Twin. It didn't seem to make much difference over an existing cheapo no-name Chinese LNB. Recently, my dish appeared to have...
View ArticleNew to forum, Help please
Hi all. I have a KVH R4 dome/dish on my barge in France. It has not been in use for 4 years, due mostly to the tree cover in summer!, I have been on to KVH and they sent me some tech lines to reprogram...
View ArticleClik here to view.
How can I install C-Band LNB on Gibertini OP 125 L
I want to install a C-band lnb on my Gibertini OP 125 L but I could not figure out how to do it. I bought a scalar ring and lnb holder for ofset antennas but there is no suitable place on the arm of...
View ArticleClik here to view.
Bloody trees.
The tree that has been blocking my 5E summer reception have grown quite a bit in all the rain this year - and this evening Ive found that are now knocking out 7E 9E & 10E as well The dishes are...
View ArticleChannel Master/Laminas 1.8m project
Welp, today, I picked up a 1.8m Channel Master dish. For me, it's the Holy Grail of dishes (even the 2.4m has less appeal for me - maybe it's TOO big?!) and finally I have it! The dish, the Az/El mount...
View ArticleInverto Black Ultra with Conical Scalar Ring for LNB, 4 Rings
Best LNB for offset dish is Inverto Black Ultra,except those professional,which most users know.What if this offset lnb could be used for the antenna Prima Focus if we could mount some scalar rings on...
View ArticleJaeger 1224 motor on Laminas 1.8m
Can anyone with more " Big Dish " experience advise if that motor could handle a Laminas 1.8 m dish ( thus I believe removing the need for a polar mount )
View ArticleWeird Diseqc Switch problem with Icecrypt sat box
Good afternoon Has anyone seen anything like the following weird behaviour: I have now got the Icecrypt STC3250CCIHD connected to one of my BEST 4-way switches which controls 4x LNBs on one of my...
View Article16e on a 60cm dish
Hiya Is it possible to get 16e on a 60cm dish? Im in SE london and the footprint maps show it should be sufficient. But im finding it very difficult to lock onto a signal while 13e and 19.2e are very...
View ArticleBefore I make a complete ass of myself again!
Following on from the tests I have run in this thread New Lnb changer , and having read the links from it regarding " centre point " or as previously named in another thread " le G spot ", I have one...
View ArticleCrunching F-connectors to secure connection?
My dad re-set up his dish and receiver yesterday and once he plugged the F-connector in to the receiver, he used a pair of pliers to secure the coax to the F-connector. Today, when I went round with an...
View ArticlePrecision Polar Mount Project
I never seem to finish my projects, so here's another one. A sort of a continuation of the Laminas/CM one but more focused on the motorised aspects of it. I have this pretty nice heavy duty Precision...
View Articleinvacom SNF - 031 vs SNH - 031 LNB??
Hello what is the difference between invacom LNB Models: SNF - 031 and SNH - 031 with hunt weak signals and stability
View ArticleProtek options
Hi guys This is my first post so please accept my apologies if I am in the wrong section or breaking any forum rules. My question is about the protek 9700 IP hd receiver. I know it can access newcamd...
View ArticleAttenuation By Mould
Some years ago I set up for SWMBO an old "Sky Analogue" Mesh (Oh yes) dish with a Monoblock for 13/19E and an offset LNB for 5W. Never touched it since, but this weekend herself was watching the newly...
View ArticleWavefrontier T90 project
Much to @Lazarus's delight, I am starting yet another project. Not a complex one but I've never done a T90 installation before. I have bought 10 LNBs along with the T90 itself and the EMP 16/1 switch....
View ArticleIRTE Dish Specifications
As I'm refurbishing my 1.5 and soon a 1.2, I dug out some data sheets from way back. I also have the installation manual for the 1.5m. If anyone wants that, please PM me.
View Article