Precision Feed Mod
With limited choice of C120 LNB's available, thought I would graft a 40mm Octagon PLL LNB onto a Precision feed. Chopped off the feedhorn on the Octagon and the C120 plate off the Precision waveguide,...
View ArticleNew satelite system setup with Multiswitch and Unicable
Hi, New here so, HI!! I was looking around for some answers regarding a new multiswitch unicable setup. The setup is rather advanced so yeah. But let's try anyway. I'm building a new IPTV server with...
View Articlecan I use two tuners for same satellite
Hi I got 2 x DVB sat tuners In my E2 box tuner B Is set for bigger dish which Is moveable and tuner A Is set for a stationary dish I would like to know If there Is a way to configure box set up In a...
View ArticleAmazonas 4 reception problem
Hi, I need urgently a strong HELP ; I setup my dish to get 4Amazonas 61W satellite, I'm living in Asuncion Paraguay latitude : -25,276527 Longitude : - 57,60734 Dish setup True Azimut 362 ° ; Magnetic...
View ArticleUK user - what FTA channels are available beyond 28.2e?
I would be really grateful for some general advice on available channels on satellites other than 28.2e? Is there a lot out there for an English speaker? I would consider a motorised dish if there are...
View ArticleMagicsat not locking on to Astra 28,2E
I have a Magicsat 2002 control unit with a 65cm motorised dish and quad LMB linked to a Freesat receiver and Sky receiver. The Magicsat has stopped locking on to Astra 28,2E. It will lock on to other...
View ArticleControlling a USALS motor with a USB tuner.
Hi, I have come across this little device and was wondering what you guys thought. https://www.amazon.co.uk/Mystique-SaTiX-S2-DiSEqC-USALS-Remote/dp/B007K59V62 Could this thing really move a satellite...
View ArticleDish elevation
First of all, please excuse my ignorance... About a year or so ago I installed my own motorised dish. I was never able to get it properly on the arc. For satellites furthest west I would need to tip...
View ArticleReceived the wrong Motor from Amazon
I order a Moteck DIGIPOWER SG 2100 A DiSEqC Motor from Amazon and for my surprised and astonishment they sent one from a company call HD Line as you can see below in the photo. My question is : 1. Has...
View ArticleVUQube dishes
Good evening all, For a while I've been wanting to receive 13E, 19E & 28.2 on a bedroom TV. We already have a fixed Sly dish and an 80cm motorised dish in use downstairs. As I understand, a third...
View ArticleClik here to view.
Methods to move a DISEQC motor
Hi there guys, I am planning a new dish and am trying to wrack my head around the wiring. I've drawn a wee plan of how it will be. So I will be using a fibre LNB with a DISEQC motor, the fibre lnb will...
View ArticleClik here to view.
Clik here to view.
HotBird 13B, 13C, 13E - mixed up with 7.0E?
I have just replaced my old satellite system with a much newer system, in particular a Mix Digital 1.1m mesh dish, a 4 way LNB holder along with 3 LNBs (Inverto Black Single Ultra 0.2dB High-Gain...
View ArticleGroup Buy: Reference Grade PLL C Band LNB's
Hi, Is anyone interested in a brand new Reference Grade PLL C band LNB? We can get a small job lot of 5 units shipped to the UK for approximately £55 GBP each excluding customs charges but including...
View Articleproblem with actuator
Hello, My superjack 18'' actuator has stopped working well and just wanted to check if maybe someone knows any trick to fix it? It is 2 years, 8 months old now so it would be good if I didn't have to...
View ArticleClik here to view.
What is most reliable DVB-S2 receiver for DiSEqC 1.2 motor positioning?
My friends dxers, I`m using still FOR YEARS analogue DVB-S Opticum 7100C receiver for moving diseqc 1.2 motorised dish, because my dish is on top of the building and out of my visibility and I can`t...
View ArticleSatbeams, Channel Masters and real life obs.
So this is going to sound stupidly obvious but bear with me! A Channel Master 1.2m, no matter what angle it is skewed over too on the arc the satellite will always be directly in line with the central...
View ArticleEdon 2120
View attachment 111465 I have found this positioner up the loft, bought it years ago, I'm just wondering if anyone knows about its spec, non Diseqc, just a 36v stand alone. Struggling to find any info...
View ArticleWavefrontier T90 project
Much to @Lazarus's delight, I am starting yet another project. Not a complex one but I've never done a T90 installation before. I have bought 10 LNBs along with the T90 itself and the EMP 16/1 switch....
View ArticleDiseqC Motor plus 150cm dish
Hi Guys, I'm jus wondering if someone has dish size 150 like either Emme Esse 150 ( 15kg) or Laminas AS-1500 (18kg) with DiseqC motor. Is to too heavy for recent motors available on market right now?
View Article