BLScan2 Speed TBS5927 vs TBS8903?
Hello! I bought TBS5927. I would like to compare BLScan2 speed between TBS5927 and TBS8903 with same parameters. Does somebody have TBS8903 and can run BLScan2 in EBS Pro on 21,5E with parameters SR:...
View ArticleHotbird & Astra 19.2
Hi all, I have just had a new (80cm) dish installed by a local installer. Originally I had a dish pointed at 13E for my Italian Sky and Tivusat. All good with strength/quality of signal in excess of...
View ArticleReed Switch Replacement
I want to replace the reed switch/sensor on my Supermount motor but I'm not sure where to get one, are they specific to the motor manufacturer? Ive seen reed switches in Maplins catalogue, but would...
View ArticleASTRA 28.2 PAN EUROPE beam
hi I live in Baghdad , Iraq and I want to receive pan europe beam of ASTRA 28.2 I know It's almost impossible but need a detailed map of that beam footprint or any other Ideas even so I have to get a...
View ArticlePrecision 2.0 metre Refurb (Barn & Bramble Rescue)
Hi, Here we go again, another Precision dish refurbishment offering. Last year it was the Precision 2.2m dish project that started in May and was abandoned in June due to the sale of the dish. A link...
View ArticleVUQUBE 2 , repair or replace HELP!
Anyone help Had a stupid self inflicted injury to my vuqube 2 wired controller, anyone have a spare or can repair. The antenna F plug came off, despitevsoldering it back on it errors. Any help appreciated
View ArticleDisecq switch noise figures
Hi, I have had a port go down on my 4 way switch, and am looking to replace. As one of my dish sizes is marginal will the noise figure be a likely issue The one i currently have is quoted at 3db and...
View ArticleAstra 2 Astra 1 HotBird
Hi, I have a fixed Triax 1m dish with one octo LNB pointing to Astra 2 and I want to install the triple LNB holder as in the picture. I want to transfer the Octo LNB to the new holder and add a further...
View ArticleClik here to view.
Old Satellite Positioner
Picked up this positioner up off Gumtree for a fiver, sadly it is missing its remote and have no clue to who the manufacturer was. It says AKITA on the PCB but that is it. Any ideas as to who made it...
View ArticleDisecq switch and disecq motor config
Hi, just a little confused on how to configure the following, if i was to go down this route to replace an ageing 36v system on my 4 dish setup 4 Way disecq switch as follows works now, but LNB2 is on...
View ArticleReception Issue
Hi I am running a TM5402HD and I can receive on TP 11449H on 7.0W with resonable quality (except for rain) I installed a system in a friends house using a TM5402 MK3 HD, but last night on a visit I...
View Articleis a 8 meter wall a barrier for me
hi i want to get asiasat 105 defree east. but a 8 meter all exist in front of me at 24 meter distance from my dish. i get some channels. but i want to know does that wall acts an a barrier to get full...
View ArticleNo or bad signal to Hotbird 13E
Hi everyone, yesterday since around noon time I started having major problems. I'm using two Seatel 6004 antennas and DAC2200. The image iz frozen and only occasionally I get the video and audio going....
View ArticleMoved house - Scottish Borders dish farm v2
Sadly the old dish farm is no more - Ive moved house and had to spend a very sad weekend dismantling the ultra complicated multi lnb / multi dish system that had evolved over the last 15 years or so. I...
View ArticleClik here to view.
Hey new to satellite
Hello guys, having a headache with my setup, but here to find help if that's ok ' Thanks Focus36
View Articleis feedhorn needed for better reception of c band signals?
is feedhorn needed for better reception of c band signals? hi i have an offset dish i want to get asiasat. my question is is feed horn needed for better reception of c band signals on offset dish? does...
View ArticleClik here to view.
Tin Dish (almost) DX on X band
OK, so Mars isn't really considered DX in the DSN arena but it's too low on the horizon for my 1.2m so I dragged the 2.4 out. For all doubters out there, the Fortec works quite well on 8.4GHz. Here's...
View ArticleSmall Dish Men Club (2.4m or smaller)
It's official, most of us on the forum are small dish men or mini dish men. Elite Antennas who make the Carlsberg range of satellite dishes have classified all dishes of 2.4m or less as small. One of...
View ArticleGibertini Polarmount Spares
Since my Gibertini polar mount has been taken down I have decided to change the u bolts that clamp it to the pole. All the u-bolts are rusted up, and the adjustment bolt is also bent. Does anyone know...
View ArticleAny IRTE Experts ?
Hi, I have a problem with an IRTE polar mount in that it seems very stiff to hand swivel it East/West. If I remove the declination plate, the top and bottom bearings rotate freely in their housings....
View Article